Re: Adjusting Anti-Chatter Rods
Quote:
Originally Posted by Fredy Decker
I want to temporarily remove the anti chatter rods on my 1940 for cleaning and repainting however they are attached to the frame with FEMALE square headed bolts. A 3/8" ratchet is to big and a 1/4" is too small. Any advise?
|
https://www.grainger.com/product/GRE...-Socket-51PH15
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'30 Model A Speedster
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"  302
|