The Ford Barn - View Single Post

rockfla · 12-12-2025, 04:16 PM

Am I the only one not following the OP's issue. What do you mean by "no distributor wire"? There is only ONE wire that goes to the distributor and that is the one that attaches at the coil (IF you have an "original" 35 distributor and coil). SO Is that what you are saying you are missing??? IF so, Bauer Electronics out in Oregon, talk to Chris, OR for just those two wires mentioned in your post....Tyree Harris in Bumpass Virginia, His contact info is in the V8 Times, either on can provide the "correct" wire with ALL the proper terminals to the correct length

12-12-2025, 04:16 PM	#4
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 5,164	Re: Distributor Wire 1935 Ford Am I the only one not following the OP's issue. What do you mean by "no distributor wire"? There is only ONE wire that goes to the distributor and that is the one that attaches at the coil (IF you have an "original" 35 distributor and coil). SO Is that what you are saying you are missing??? IF so, Bauer Electronics out in Oregon, talk to Chris, OR for just those two wires mentioned in your post....Tyree Harris in Bumpass Virginia, His contact info is in the V8 Times, either on can provide the "correct" wire with ALL the proper terminals to the correct length Last edited by rockfla; 12-12-2025 at 04:22 PM.