Re: Aluminum head
Sponsored Links (Register now to hide all advertisements)
It looks like a nice combustion chamber shape. No relief for the pistons so you must use pistons that don't come up over the top of the block at TDC. Looks like it may be 7 to 1. You can just measure the volume of the combustion chamber to calculate the compression ratio.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|