Quote:
Originally Posted by glennpm
The turtle will take a one tooth change without modification. For two tooth difference, buy another turtle or grind to fit or by adding gaskets between the turtle and the torque tube.
Do you know the rear-end gearing? See this post to pick the correct tooth count in the turtle.
https://www.fordbarn.com/forum/showp...12&postcount=7 |
i may have to replace my turtle due to stripped threads...so this thread interests me.
so can i assume that if i replace my turtle with a new turtle with the same tooth count, i will, most likely, not experience the problems outlined by the owner of this thread?
the only reason i ask, is that if the answer is "yes", then i need to remove the old turtle and count its teeth before ordering a new one.