The Ford Barn - View Single Post

Karl Wescott · 05-04-2025, 06:00 PM

Yes, no, and maybe.

The 1940 and 1941 pickup hoods share the same stamping, hood hinge, and hood prop mounting. There are different cutout and mounting hole locations for the differing front trim. The hood latch assembly is different between the 1940 V8 and the 1941 6 cylinder (and must match the grille), I am not sure if the 1941 V8 used the 1940 version or could use either (a 6 cyl hood/grill will work with a V8, a V8 hood/grille not with a 6 cyl).

05-04-2025, 06:00 PM	#2
Karl Wescott Senior Member Join Date: May 2010 Location: Oregon Posts: 1,662	Re: 40/41 hood Yes, no, and maybe. The 1940 and 1941 pickup hoods share the same stamping, hood hinge, and hood prop mounting. There are different cutout and mounting hole locations for the differing front trim. The hood latch assembly is different between the 1940 V8 and the 1941 6 cylinder (and must match the grille), I am not sure if the 1941 V8 used the 1940 version or could use either (a 6 cyl hood/grill will work with a V8, a V8 hood/grille not with a 6 cyl).