Re: Babbit clearancing
Another answer is to use the yellow Timesaver to bed in the offending bearing. The yellow Timesaver will remove material from soft metal but not the crankshaft. Bring the torque up a little at a time while using the yellow Timesaver and turning the crankshaft over. When done, clean out all the Timesaver.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|