View Single Post
Old 03-29-2025, 12:05 PM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,010
Default Re: Model at stuck Bendix

Pull the starter first if you haven't already. This will allow the flywheel to turn if nothing else is wrong. Do easy things first. Pull plugs and look in cylinders if you can. The clutch in the transmission is what decouples the drive to allow hand cranking. If it won't turn and it's not the engine then the transmission is the next check. With the hogs head off a person can look in there.

Last edited by rotorwrench; 03-29-2025 at 12:23 PM.
rotorwrench is offline   Reply With Quote