Quote:
Originally Posted by Bruce of MN
What will you use for a switch?
|
I used a plastic toggle switch from Auto-Zone on the phaeton. Worked great.
Bought one yesterday from Advance ($6.00) on-off-on. Be sure to wire the switch backward so that left is left and right is right. It is not a lighted switch because they all seem to be 12 volt. I did put in a
bright indicator light and a 10 amp fuse link. I ran all wiring behind the gas tank and all the electrical stuff is behind the drivers kick panel. When the lights arrive I will lay out all of the pieces and get a picture. Today I made the panel for the toggle and the indicator light. Tomorrow brackets for the rear lights. Wiring will be the worst part, feeding and fastening everything underneath!