[signsup]

My understanding that the headliner shop would provide material for visors. This car does not have a package tray shelf, just the metal base and frame and no trim or lacework around the head liner. Absolutely no original fabric on the headliner and the six bows are in place to hold up the Home Depot insullation that Bubba installed. I'll go down to the shop and feel, just presumed that the bows slipped into a ctrack and then bolded up against the insullation and they fell where they fell and would slide in the track to conform to the loop or sleeves in the head liner material. But they may actually clip into mounts and are not adjustable front to back as I envision. So I could provide spacing measurements to the shop if they are fixed and they match a Ford pattern. Thank you for the guideance.