The Ford Barn - View Single Post

Smitty · 06-07-2010, 05:01 AM

I agree with Marco, I use 3/8" drive most of the time, rarely 1/2" drive except when removing head bolts, Mains, rods. etc.
You can feel when it is tight enough.

06-07-2010, 05:01 AM	#20
Smitty Senior Member Join Date: May 2010 Location: Boston North Shore Posts: 755	Re: Don't get anal about bolts and torque! I agree with Marco, I use 3/8" drive most of the time, rarely 1/2" drive except when removing head bolts, Mains, rods. etc. You can feel when it is tight enough.