The Ford Barn - View Single Post - Mitchell/speedo not working-need ideas

Tom Endy · 01-25-2025, 05:21 PM

The little plastic gear on the end of the Mitchell speedo extension cable has been known to fail. They are available from a Ford dealer or Mitchell. Loosen the set screw and pull it out, expect a bunch of oil to run out with it. The gear is on the end of the cable with a snap ring. Easy to replace.

Tom Endy

01-25-2025, 05:21 PM	#4
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,168	Re: Mitchell/speedo not working-need ideas The little plastic gear on the end of the Mitchell speedo extension cable has been known to fail. They are available from a Ford dealer or Mitchell. Loosen the set screw and pull it out, expect a bunch of oil to run out with it. The gear is on the end of the cable with a snap ring. Easy to replace. Tom Endy