The Ford Barn - View Single Post - '48 F1 ignition switch post resistance. What's "ok"?

Terry,OH · 01-04-2025, 07:22 AM

Spray cleaner into the switch and work back and forth until each leg is less than 0.5 ohm 0.2 or so. use the pointed probes on the ohmmeter and stab them into the screw post ends.

01-04-2025, 07:22 AM	#3
Terry,OH Senior Member Join Date: May 2010 Posts: 5,395	Re: '48 F1 ignition switch post resistance. What's "ok"? Spray cleaner into the switch and work back and forth until each leg is less than 0.5 ohm 0.2 or so. use the pointed probes on the ohmmeter and stab them into the screw post ends.