Quote:
Originally Posted by air1force1
Hello, does anyone know if the 39 standard hood, when opened would remain open without a prop? Mine will not, and not sure if it is missing springs. Currently i use a rod to prop open, but this is risky on windy days.
Thanks,
John
|
No prop rod required.
Be aware that the reproduction hood supports are NOT correct even though they are advertised as such.
Rebuilding yours is the best path forward. Usually all that is required is removing the rivet at the pivot point, welding up the holes (sure to be elongated) and redrilling / reaming to the correct diameter.
Find a rivet of the correct diameter at your local hardware store, cut it to the proper length, about 3/16" longer than the total width of the support levers, insert and peen over.
You may swap out the springs if you really feel the need but, in my experience, the elongated holes are the root casue of the supports not doing their job.