View Single Post
Old 12-18-2024, 08:15 PM   #6
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,010
Default Re: Grease trans input shaft (the shaft in the clutch)?

Sponsored Links (Register now to hide all advertisements)
Grease is good if a spline has to slide like on a drive shaft. Clutch disks and flywheels don't work if grease gets slung around in there. I would be sparing with anti seize too. Anti seize will keep fretting from going on between parts.
rotorwrench is offline   Reply With Quote