Re: 8ba Distributor Clocking
Quote:
Originally Posted by Shoebox
Thanks fellas for the responses. I did remove the clamp piece and clocked the dist. where I wanted it (11:00-12:00 O'clock) and was able to remount the clamp piece, which puts the dist at the correct depth as well. I did seal the two now unused small screw holes from the original plate mounting with silicone.
|
Exactly. Well done! 
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'30 Model A Speedster
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up" 302
|