The Ford Barn - View Single Post

Bored&Stroked · 10-28-2024, 10:08 AM

Sure, but you should validate the fuel-pump height and also whether or not you can install the breather "baffle" in the rear that a 59AB should always have. I'm not at home, so I can't remember whether or not the 8BA fuel-pump riser is the same height as the 59AB (seems I remember it being different). You should check the height and validate whether a breather baffle is available - along with the correct length fuel-pump push rod.

10-28-2024, 10:08 AM	#2
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,910	Re: 8ba manifold on 59a motor Sure, but you should validate the fuel-pump height and also whether or not you can install the breather "baffle" in the rear that a 59AB should always have. I'm not at home, so I can't remember whether or not the 8BA fuel-pump riser is the same height as the 59AB (seems I remember it being different). You should check the height and validate whether a breather baffle is available - along with the correct length fuel-pump push rod.