The Ford Barn - View Single Post

Benson · 08-17-2024, 10:09 PM

It is a good idea to drain coolant BEFORE loosening ANY head nuts.

If not drained then coolant can end up in oil pan.

Coolant in oil can damage bearings.

08-17-2024, 10:09 PM	#5
Benson Senior Member Join Date: May 2010 Location: Central Highlands, Cen~Col Posts: 2,896	Re: #7 head stud leaking water It is a good idea to drain coolant BEFORE loosening ANY head nuts. If not drained then coolant can end up in oil pan. Coolant in oil can damage bearings. Last edited by Benson; 08-17-2024 at 10:29 PM.