The Ford Barn - View Single Post - How does the Knob go onto the Hood Cable on a 46 Ford

tubman · 07-02-2024, 10:45 AM

I'd run an appropriately-sized coarse tap down the hole in the handle and put a couple of crimps in the wire to give the epoxy something to "grip" on.

07-02-2024, 10:45 AM	#7
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 12,140	Re: How does the Knob go onto the Hood Cable on a 46 Ford I'd run an appropriately-sized coarse tap down the hole in the handle and put a couple of crimps in the wire to give the epoxy something to "grip" on.