The Ford Barn - View Single Post

tubman · 05-25-2024, 01:05 PM

They're all pretty much the same. The important part is that any heads need to be custom fitted to the particular engine to obtain optimum quench. See the thread By "GB Sisson" entitled "276 stroker from 35 years of parts"; it has just about everything you need to know.

"New" Evans heads? If they really are, I'll bet they are super expensive.

05-25-2024, 01:05 PM	#2
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 12,148	Re: Evans Aluminum Heads They're all pretty much the same. The important part is that any heads need to be custom fitted to the particular engine to obtain optimum quench. See the thread By "GB Sisson" entitled "276 stroker from 35 years of parts"; it has just about everything you need to know. "New" Evans heads? If they really are, I'll bet they are super expensive.