06-28-2011, 10:30 PM
|
#25
|
|
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: Engine block I.D. pictures
Something to consider : Look at the cast in vent tower around the fuel pump bushing on the 35-36 block . Look at the holes drilled for the main cap bolts on the 33 block by the fuel pump bushing . Same issue with the RF main cap bolt -v-vented block . This kinda ends the bolt-stud mystery with me . Mebbe y'all nowd dis aready but me dint . An dasssa gooot  David J
|
|
|