View Single Post
Old 04-26-2024, 11:38 AM   #10
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,778
Default Re: Removing perch bolt for repair

This is how I remove shackles. I put the car on jackstands and put floor jacks under the spring ends. If you jack one up so the shackle is level you will be able to jack the other one up until the shackle is not loaded. You can use wood blocks to level the static end also. I have done this on front and rear springs. I got rid of my spring spreader.
Andy is offline   Reply With Quote