The Ford Barn - View Single Post

cpldale · 04-23-2024, 11:57 AM

I bought what I was told were 46-48 front and rear brake drums with hubs. The drums were out of spec so I used a 5/8 hole saw to remove the the studs and separate the drums from the hubs. So far, so good. I went to order replacement drums and realized the center hole in the replacement drum is 3 1/4". The center hole in the old drums is 4". Not sure what I have. Any thoughts?

04-23-2024, 11:57 AM	#1
cpldale Senior Member Join Date: May 2010 Location: Naples, FL Posts: 406	Brake drum question I bought what I was told were 46-48 front and rear brake drums with hubs. The drums were out of spec so I used a 5/8 hole saw to remove the the studs and separate the drums from the hubs. So far, so good. I went to order replacement drums and realized the center hole in the replacement drum is 3 1/4". The center hole in the old drums is 4". Not sure what I have. Any thoughts?