Thread
:
how to get bushings out of oil pump without busting the casting (again)
View Single Post
04-16-2024, 11:03 AM
#
5
ursus
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,379
Re: how to get bushings out of oil pump without busting the casting (again)
I use a 13M metric tap (0.512 inches) in the manner described by Brent in Post #4. This method works as well for removing distributor bushings also.
ursus
View Public Profile
Send a private message to ursus
Find More Posts by ursus