Quote:
Originally Posted by Tim Ayers
Not a bushing, but a plug or grub screw to block or close that hole off. Without the push rod in place, oil will be forced through that hole. In a stock set-up, the push rod would cause resistance to the flow of oil through that hole. Now there is nothing stopping it.
|
Tim, he had pressure for several minutes' running, then none on a restart.
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302