The Ford Barn - View Single Post - Value of an Un-Restored Model A Engine

Joe K · 03-04-2024, 08:39 PM

When I have paid, which isn't often, I usually go $100 for an engine block WITH Flywheel/clutch and flywheel housing (which half the time are cracked.)

Bell housing runs $20 to $50 with the higher number if it includes pedals.

Transmission $75 to $100. Expect at least one gear to be trashed in a tranny and replacement of ALL the bearings is a certainty. I have bought a cracked transmission, but only for the guts within. $25 for those.

It's hard. Wife is quick to remind me that I may be buying these so my children can scrap them.

Joe K

03-04-2024, 08:39 PM	#13
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: Value of an Un-Restored Model A Engine When I have paid, which isn't often, I usually go $100 for an engine block WITH Flywheel/clutch and flywheel housing (which half the time are cracked.) Bell housing runs $20 to $50 with the higher number if it includes pedals. Transmission $75 to $100. Expect at least one gear to be trashed in a tranny and replacement of ALL the bearings is a certainty. I have bought a cracked transmission, but only for the guts within. $25 for those. It's hard. Wife is quick to remind me that I may be buying these so my children can scrap them. Joe K __________________ Shudda kept the horse.