Sponsored Links (Register now to hide all advertisements)
Thanks, all. That's the replacement ball I remembered. Don't know why I couldn't find it in Snyder's catalog, senior moment maybe.
Photo of the wishbone displacement attached. The hole diameter is a bit less than 3/4", and the displacement is about half the diameter. So a total displacement of ~3/8", or 3/16" each side. I have no doubt that when reinstalling I can close that gap properly. And in looking at the wishbone more closely, I can see that one side is dead straight and the other side bows in very slightly (maybe 1/4" max). No signs of any trauma to the assembly, so maybe it was originally assembled that way. I may be able to find a press and straighten that leg out.