View Single Post
Old 12-31-2023, 01:04 PM   #4
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 4,016
Default Re: engine splash pans

The stock engine mounts also allow some movement. The Float-A-Motor mounts can be tightened up if you are worried about it but then you are defeating the cushioning. Lots of owners stick with the original engine mounts because they feel the engine then becomes another frame member. If you use the original mounts, replace the rubber sheets.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote