The Ford Barn - View Single Post

Jim Brierley · 12-11-2023, 12:32 PM

Hopefully you set the pre-load on the bearings as the new housing may, or may not be, identical to the old one. This may not be critical as Ford parts were made to an exact standard, run it and see how it acts.

12-11-2023, 12:32 PM	#2
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,112	Re: Rear axle and diff Hopefully you set the pre-load on the bearings as the new housing may, or may not be, identical to the old one. This may not be critical as Ford parts were made to an exact standard, run it and see how it acts.