View Single Post
Old 06-22-2011, 12:01 PM   #6
MN Stumpjumper
Senior Member
 
MN Stumpjumper's Avatar
 
Join Date: May 2010
Posts: 203
Default Re: Flathead cooling advice wanted

Sponsored Links (Register now to hide all advertisements)
It is a stock motor, I know it pukes on decell. because the overflow tube is broken off and when it pukes I can smell it,and it eventully blow out of the hood.
It has a 7lb. cap , I'm not sure if it seals in the neck(I'll check). I suspected a compression leak also, I'll try pressure on the system to see if I can detect any signs of coolant in the cyls. Thanks for the feedback Guys!
MN Stumpjumper is offline   Reply With Quote