I did some seaarching for you and found a 2016 listing for a '33 switch housing on the HAMB. The listing didn't say passenger or truck.
https://www.jalopyjournal.com/forum/...-only.1012992/
Below is a portion of the lock housing for the Green Book but note that the B 3676 indicates that it is good through '34 as shown below. This is not correct for passenger cars. It may be that the pickup trucks 32 to 34, used the 32 passenger part B 3676. Also note that the 40 3676 is for passenger and then 46 3676 for all commercials. This may not be correct either. For some years the pickup and commercials are mounted at a steeper angle with less distance for the lock assembly between the bottom of the dash and the hole for the column, part 3509. From the picture above there is already little distance between the hole and the bottom of dash mounting.
Need some help from truck owners here to clarify.
