The Ford Barn - View Single Post

Seth Swoboda · 11-08-2023, 03:00 PM

A compression check would be in order. I just replaced an engine, 21 stud, that had 60 psi per cylinder. It ran well but lacked a lot of power through the RPM range/gears.

11-08-2023, 03:00 PM	#9
Seth Swoboda Senior Member Join Date: May 2010 Location: Southern Illinois Posts: 3,833	Re: 1940 v8 timing A compression check would be in order. I just replaced an engine, 21 stud, that had 60 psi per cylinder. It ran well but lacked a lot of power through the RPM range/gears.