8ba question
I will not bore you with all that I went through with this engine but here is my question. I obtained this engine with a 4" crank, racing pistons, and a 400jr cam. No heads or intake. I put a stock intake and stock 8BA heads on it and promptly bent 15 out of 16 valves. It would sort of run on 5 cylinders. After taking all apart, I find I have sbc valves. The exhaust are 1.5" and the intakes are 1.6". After getting new valves and different heads with more valve pocket clearance, and doing a little modification it is again running. It runs good but I don't like the sound out the exhaust. With the other stuff different to the engine, can I just put in a stock cam? This car will never do more than cruise the streets of town. I forgot, it has adjustable lifters.
|