The Ford Barn - View Single Post

rockfla · 09-01-2023, 03:13 PM

Have you checked the main wire for voltage reading to the coil to make sure you're getting power to the coil to start. Use a VO meter, you "should" have as close to 6V at the coil lug as possible. Also will help with advice on the next move.

09-01-2023, 03:13 PM	#2
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 5,164	Re: Original flathead with no spark Have you checked the main wire for voltage reading to the coil to make sure you're getting power to the coil to start. Use a VO meter, you "should" have as close to 6V at the coil lug as possible. Also will help with advice on the next move.