The Ford Barn - View Single Post

Jim Brierley · 07-14-2023, 10:49 AM

I suspended a small panel from the left side of the dash rail and mounted 3 switches in it. One bolt and an angle bracket is all that was needed, a hand built angle bracket about 3/4" wide and bent 90*. The panel was formed from a scrap of aluminum. Sorry, no pics.

07-14-2023, 10:49 AM	#2
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,107	Re: Push button starter I suspended a small panel from the left side of the dash rail and mounted 3 switches in it. One bolt and an angle bracket is all that was needed, a hand built angle bracket about 3/4" wide and bent 90*. The panel was formed from a scrap of aluminum. Sorry, no pics.