The Ford Barn - View Single Post

CT Jack · 07-10-2023, 07:52 AM

The #4 manifold port cannot move independently from the other 3 ports. Yes, the entire manifold can rotate if not properly fastened.
Droop in my view is primarily the result of the manifold not being properly torqued. I cold check the 45#-ft torque on the manifold studs at least twice a year.

07-10-2023, 07:52 AM	#10
CT Jack Senior Member Join Date: May 2010 Location: Hebron, CT Posts: 639	Re: Manifold gasket hole size The #4 manifold port cannot move independently from the other 3 ports. Yes, the entire manifold can rotate if not properly fastened. Droop in my view is primarily the result of the manifold not being properly torqued. I cold check the 45#-ft torque on the manifold studs at least twice a year.