The Ford Barn - View Single Post

lrf · 06-29-2023, 05:05 PM

I found that there is about six inches of webbing riveted to the underneath of the rumbleseat sheet metal riser that rests on the rear crossmember. Again, metal to metal. Drive that "A"!

06-29-2023, 05:05 PM	#9
lrf Senior Member Join Date: Jun 2019 Location: long beach ca Posts: 171	Re: frame webbing I found that there is about six inches of webbing riveted to the underneath of the rumbleseat sheet metal riser that rests on the rear crossmember. Again, metal to metal. Drive that "A"!