Quote:
Originally Posted by Dirtslinger
When you say fit to the crank, do you mean turning the journals? This crank is standard, what would you suggest I do? The crank is currently at the machine shop getting cleaned and polished.
|
The main and rod bearings for an 8BA type engine are precision fit and if the crank is standard or a normal undersize no custom fitting will be necessary. Checking with Plasigage is always a good idea, but you should have no problems at all.
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'30 Model A Speedster
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302