Re: Battery Disconnect Switch
I used to work for a company that modified off road cranes for special uses and the disconnect switches were always in the positive side.
I installed a disconnect switch in my 1928 and intend to install one in the 1930 as I restore it also. I mounted the switch just in front of the motor mount with a bracket I had that was marked Ford. There was already a threaded hole in the motor mount to bolt it to. To mark on and off I used a Model A ON-Off plate #A-11556 & a Switch plate ring # A-11557.
I have attached a picture, I have replaced all of the wiring with a correct harness since the picture was taken.
|