The Ford Barn - View Single Post

rich b · 04-21-2023, 09:52 PM

Another solution if you are stuck using the bad (new) wheel cylinders is to mill the slot on the large piston a little deeper letting the cup move out and away from the miss-drilled hole.

04-21-2023, 09:52 PM	#13
rich b Senior Member Join Date: May 2010 Location: Minnesota Posts: 2,156	Re: Wheel Cylinder issues Another solution if you are stuck using the bad (new) wheel cylinders is to mill the slot on the large piston a little deeper letting the cup move out and away from the miss-drilled hole.