The Ford Barn - View Single Post

Terry,OH · 02-26-2023, 11:47 AM

Yes it is possible to solder a ground to the body of the condenser as you have done in your photo. Do clean the plating off the body before soldering. No the center screw terminal should not turn if it does the condenser is bad.

02-26-2023, 11:47 AM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 5,395	Re: 36 flat top coil condenser Yes it is possible to solder a ground to the body of the condenser as you have done in your photo. Do clean the plating off the body before soldering. No the center screw terminal should not turn if it does the condenser is bad.