Quote:
Originally Posted by Wick
Use a original switch with good bumps. This will give you a "click" when you use it.
A old original spider works and fits the best.
Use a yard stick slipped through the steering wheel to hold the light rod in position.
Caution...the Clip should not be easy to install,if it does your putting it in the wrong place.
Push up on the spider real good.....then you will see where the clip is really supposed to go.
|
That’s good advice, as I recently made that mistake of not putting the clip in the right place. Fortunately a friend came over and somehow the assembly got bumped or something, and the clip went flying. I didn’t have another, so it took about 15 minutes to find it, and then install it in the correct spot.