View Single Post
Old 02-17-2023, 07:38 AM   #13
Wick
Senior Member
 
Wick's Avatar
 
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,424
Default Re: lite switch assembly question

Use a original switch with good bumps. This will give you a "click" when you use it.
A old original spider works and fits the best.
Use a yard stick slipped through the steering wheel to hold the light rod in position.
Caution...the Clip should not be easy to install,if it does your putting it in the wrong place.
Push up on the spider real good.....then you will see where the clip is really supposed to go.
Wick is offline   Reply With Quote