The Ford Barn - View Single Post

Robert/Texas · 02-02-2023, 06:31 AM

The ends are spring loaded. I grab the rods and the shafts with pliers and pull on the ends to remove them. It is possible that someone has buggered the ends so much that this won't work.

02-02-2023, 06:31 AM	#2
Robert/Texas Senior Member Join Date: May 2010 Location: Burton, Texas Posts: 690	Re: Replacement throttle shaft The ends are spring loaded. I grab the rods and the shafts with pliers and pull on the ends to remove them. It is possible that someone has buggered the ends so much that this won't work.