View Single Post
Old 01-20-2023, 05:13 PM   #2
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 6,854
Default Re: temp and oil pressure gauge

There is a tap on the starboard side of the engine, below the distributor, that can be used to sense oil pressure. The temperature sensor must be screwed into the goose neck (coolant outlet). A goose neck with the proper tapped hole is available from the vendors, see

https://www.snydersantiqueauto.com/p...4021&cat=41737
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.

Last edited by nkaminar; 01-20-2023 at 10:15 PM.
nkaminar is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)