The Ford Barn - View Single Post

deuce_roadster · 12-27-2022, 09:57 PM

Find another 3 bolt distributor that uses a 2 screw coil and send it and a correct used coil to one of the reputable rebuilders here on the Barn (Michael at 3rd Gen or Skip Haney in Florida, there are others) Skip also can rebuild a stock coil with new innards. In my estimation, NOS points and a good condenser of the correct MFD rating are the most difficult parts to find. Good luck.

12-27-2022, 09:57 PM	#2
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 4,043	Re: 1941 Ignition parts recommendations Find another 3 bolt distributor that uses a 2 screw coil and send it and a correct used coil to one of the reputable rebuilders here on the Barn (Michael at 3rd Gen or Skip Haney in Florida, there are others) Skip also can rebuild a stock coil with new innards. In my estimation, NOS points and a good condenser of the correct MFD rating are the most difficult parts to find. Good luck.