The Ford Barn - View Single Post

Gene1949 · 12-13-2022, 10:43 AM

When I did mine I also cut it for the old Chrysler magnetic pickup and reluctor. All wreaking yard "repurposed" junk.
Then you get to use the electronics of your choice. I used an HEI brain and one of GM's newer "E" coils tucked under the distributor. The late '90s V6 application had a nice heat sink for both. I've ran it for 20+ years and many miles using Bubba's curve
(Thank you Bubba).

12-13-2022, 10:43 AM	#12
Gene1949 Senior Member Join Date: Jun 2016 Location: Pahrump, NV Posts: 513	Re: chevy dizzy for flatheads When I did mine I also cut it for the old Chrysler magnetic pickup and reluctor. All wreaking yard "repurposed" junk. Then you get to use the electronics of your choice. I used an HEI brain and one of GM's newer "E" coils tucked under the distributor. The late '90s V6 application had a nice heat sink for both. I've ran it for 20+ years and many miles using Bubba's curve (Thank you Bubba).