The Ford Barn - View Single Post

The Geezer · 11-26-2022, 05:59 PM

I finally was able to get the bezel off using an exacto and tapping with a jewelers hammer. It wasn’t a screw-on. Will be cleaning and calibrating it and put it back together like it was originally.
Thanks to all who offered suggestions. This forum is awesome!

11-26-2022, 05:59 PM	#4
The Geezer Senior Member Join Date: Jul 2022 Location: The Villages FL Posts: 204	Re: Vintage Tire Gauge Question I finally was able to get the bezel off using an exacto and tapping with a jewelers hammer. It wasn’t a screw-on. Will be cleaning and calibrating it and put it back together like it was originally. Thanks to all who offered suggestions. This forum is awesome! __________________ “Finally driving a car older than me!”