The Ford Barn - View Single Post

Mart · 10-27-2022, 06:57 AM

Granny, if your machinist is worried at .060, that's chevy type thinking. It would appear your machinist is not familiar with flatheads or sonic testing.

Your flathead should take a .060" overbore no problem.

10-27-2022, 06:57 AM	#3
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,240	Re: 0.060 oversize Pistons Granny, if your machinist is worried at .060, that's chevy type thinking. It would appear your machinist is not familiar with flatheads or sonic testing. Your flathead should take a .060" overbore no problem.