The Ford Barn - View Single Post

Terry, NJ · 10-24-2022, 10:45 AM

I Rarely buy what I can make. So a friend of mine was building a race car and had some scrap chrome-moly tubing he would have eventually junked. It was 1 1/4" I.D. and from that I fabricated a spring spreader that I have used successfully several times.
Terry

10-24-2022, 10:45 AM	#32
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,749	Re: An Introduction and a First Early Ford I Rarely buy what I can make. So a friend of mine was building a race car and had some scrap chrome-moly tubing he would have eventually junked. It was 1 1/4" I.D. and from that I fabricated a spring spreader that I have used successfully several times. Terry