The Ford Barn - View Single Post

RyanAK · 10-21-2022, 11:30 AM

There's (amazingly) almost no wear on the head casting where the water pump shaft rides. Maybe 1/64". Therefore almost zero endplay in the pump. I was prepared with a shaft collar if needed, but thanks for the check! I'll need those as I go through this and I'm sure I'll overlook something.

R

10-21-2022, 11:30 AM	#28
RyanAK Member Join Date: Oct 2022 Location: Mifflinburg, PA Posts: 47	Re: An Introduction and a First Early Ford There's (amazingly) almost no wear on the head casting where the water pump shaft rides. Maybe 1/64". Therefore almost zero endplay in the pump. I was prepared with a shaft collar if needed, but thanks for the check! I'll need those as I go through this and I'm sure I'll overlook something. R